Working principle:
Through the cavities inside the mold, molten plastic is injected and cooled to form the desired product shape. A mold usually consists of two parts: a fixed mold and a movable mold. When the plastic is injected, the mold closes and a certain amount of pressure is applied to ensure that the plastic is filled completely. A cooling system may also be set up inside the mold to quickly cool and cure the plastic. Once the plastic is fully cured, the mold opens and the finished product is removed.
According to the mold structure, it is divided into: 2K Molding、Overmolding, injection mold
According to the injection molding material, it is divided into: plastic injection mold, Silicne Rubber Molding
Plastic Mould material: P20, 718, NAK80, S316H
Silicne Rubber Molding material：No. 50 steel, No. 45 steel, P20, 8407, H13, 718H, etc.
Mould base：LKM, HASCO
Mould cavity：Single, Multi
Runner system：Hot / Cold
Mould life: 100-500K shots
Mould testing：all of the moulds can be well tested before the shipments. videos for moulds trial running are available.
Equipment: five Fanuc high-speed copper machine, three Seiki high-speed CNC, six Sodick Mirror EDM machine, two Sodick slow wire-cutting machine,93 single-color injection moulding machine,7 double-color injection moulding machine
Specific application scenarios:
1、Eletronics：remote controls,scanners,game console,cell phone holder,charger,mini fan,etc.
2、Medical：thermometers, sphygmomanometers, sprayer, mask etc.
3、storage boxes,food containers,children's toys,protective corners,pet food bowls etc.
4、Automotive：steering wheel trim cover,door handle,wiper holder,cup holder,fuel tank cap etc.
